IMPORTANT TIP: REMOVING THE BACKING SHEET

We sometimes get reports that "the sticker wouldn't peel away properly". In almost all cases this is because the sticker and transfer layer have been separated from the backing sheet the wrong way!

ALWAYS separate the backing sheet from the rest of the sticker by PEELING the backing sheet away (rather than trying to peel the sticker away from the backing sheet). 

If you do it the wrong way (see below) the stickers will not release as easily.

YOU TUBE VIDEOS

We've placed a series of videos on You Tube that we hope will help you install our stickers. Just click on the links below.

We recommend one of the two hinge methods - they enable you to accurately place your stickers.

Basic peel and stick instructions (suitable for small stickers)

Vertical centre hinge instructions (suitable for medium-large stickers - landscape shape - ie wider than longer)

Horizontal centre hinge instructions (suitable for medium-large stickers - portrait shape  - ie longer than wider)

REMOVING STICKERS

To remove stickers, first apply some gentle heat using a hair dryer or heat gun. Roll the sticker away from the wall slowly (don’t pull), re-heat and roll some more. Work slowly.

Please note that anything that sticks to a wall has the potential to cause damage depending on factors such as condition of the wall, length of time on wall and amount of care taken. We cannot accept responsibility for damage.